The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it's design an outstanding performace has been achieved, allowing more efficient work.
Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. Thanks to it's uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.
The XR50 is specially designed for high-volume production in quarries and infrastructure works. Production volumes are reached over 150 m3 per hour in limestone and other types of fractured rock. Also for trenching and recycling.
You can reach the product details below.
| Hydraulic excavator | tons | 42 - 55 | |
| Mass of ripper (incl. top bracket) | kg | 5600 | |
| Mass of ripper (less top bracket) | kg | 5000 | |
| Hydraulic working pressure | MPa | 26 - 28 | |
| Hydraulic return pressure | MPa | 0.6 | |
| Hydraulic oil flow | L/min | 250 | |
| Case drain maximum pressure | MPa | 0.4 | |
| Frequency | 1/min | 1000 | |
| Dimensions L x W x H | cm | 320x90x190 | |
| Accumulator pressure | MPa | 0.5 |
Suitable for:
Altınkum Mahallesi 433 Sokak Peker Apartmanı No:8/6
Konyaaltı / ANTALYA
© 2024, DBF LiMiTED | XCENTRiC RiPPER. All Rights Reserved.
