The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Thanks to it's uncomplicated mechanical design, which has no pricey components the maintenance cost are very low and down times are ignorable.
Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. The Xcentric Ripper is ideal for tunnel construction, working on walls and ceilings, and for other jobs. Thanks
to it's uncomplicated mechanical design, which has no pricey components,
the maintenance cost are very low and down times are ignorable.
The XR10 is suitable for demolition works, where noise is an issue. Also for excavation, trenching or recycling plants it can be a perfect solution.
You can reach the product details below.
| Hydraulic excavator | tons | 7 - 10 | |
| Mass of ripper (incl. top bracket) | kg | 930 | |
| Mass of ripper (less top bracket) | kg | 829 | |
| Hydraulic working pressure | MPa | 15 - 18 | |
| Hydraulic return pressure | MPa | 0.6 | |
| Hydraulic oil flow | L/min | 60 | |
| Case drain maximum pressure | MPa | 0.4 | |
| Frequency | 1/min | 1500 | |
| Dimensions L x W x H | cm | 180x45x90 | |
| Accumulator pressure | MPa | 0.6 | |
Suitable for:
Altınkum Mahallesi 433 Sokak Peker Apartmanı No:8/6
Konyaaltı / ANTALYA
© 2024, DBF LiMiTED | XCENTRiC RiPPER. All Rights Reserved.
